2x12 Guitar Cabinet DIY Kit
Make some noise with our 2x12 extension cabinet kit. This cabinet can deliver that little extra "oomph" you need to project your tone forward. With a back panel split into thirds, you have the option of either an open or closed back format. Rotate the cabinet 90 degrees for a vertical style 2x12 stack.
Dimensions: 27" x 20" x 11" (WxHxD)
Material: 18mm Baltic birch shell, 12mm Baltic birch baffle & back
Weight: 28.8 lbs
Speaker cutout: 11"
Mounting hole PCD: 11.7"
Parts Included: Baltic Birch wood cabinet parts, handle, rubber feet, 1/4" Jack, metal jack plate, T-nuts, screws, finishing washers
Note: This kit comes flat-packed and does not include Tolex or grille cloth.
The benefit of using CNC fabrication is the extreme control over dimensions and tolerances. We’ve listened to customer feedback and adjusted our tolerances to fit most scenarios. Parts slot together with ease and confidence, and we’ve left plenty of room for grille cloth and Tolex between parts.
Using modern finger joint techniques that are unique to the CNC process, we’ve developed a cabinet that is extremely rugged when properly assembled. The added benefit is that the parts fit together perfectly and can’t be placed in the wrong spot. These “digital finger joints” are a modern take on the classic approach by some of the best cabinet builders in the industry.
The wood we use on all of our products is a voidless, furniture grade Baltic birch which provides unparalleled strength and uniformity. With undulating grain on both inside and outside faces, your cabinet will look great wrapped or stained.
Our cabinets make use of 18mm Baltic birch for the outer shell which ensures a rugged product that will last many years. We use 12mm Baltic birch for the back pieces, the grille frame, and the baffle.
All of our products feature an inset baffle which means it is slotted into the inside surface of the Top, Bottom, Left, and Right pieces of the shell. This helps tremendously with sound projection as well as helping to keep the cabinet square during assembly. What results is a great sounding cabinet that’s durable and easy to assemble.
Each cabinet is designed to be rear loaded. This means that the speaker is inserted from the inside and attached to the inside surface of the baffle. We’ve provided T-Nuts and machine screws to make sure everything lines up perfectly and that the speaker is strongly secured. Using the CNC, we’ve created dedicated pockets to insert the T-Nuts so they sit flush with the baffle, providing a clean and interrupted surface.
Jack & Jack Plate
Every cabinet needs a jack, and so we’ve provided a standard, mono ¼” jack and respective jack plate. There is a dedicated pocket for this sub-assembly so that the jack plate sits flush with the back of the cabinet.
Your cabinet comes with a plastic dog-bone handle which is as durable as the cabinet itself. The handle is attached using T-Nuts in the underside of the cabinet and machine screws holding it together so that you can be sure it will never pull out of the wood.
The cabinet sits on four tapered rubber feet which are attached with wood screws from the bottom. There are pilot holes included for this part of the assembly.
Assembly is easy and your cabinet comes with simple to follow instructions that can be downloaded from our website. We’ve designed the product so that there is only one correct way to put it together and so we encourage first time builders to join in on the fun of building their own custom guitar cabinet.